RS232 Controlled and Powered DVM-001 Voltage Input Kit

RS232 DVM-001 Voltage Input Board
in Kit Form or Fully Assembled and Tested

DVM-001 RS232 controlled and RS232 powered 0-54v digital volt meter. Kit includes:

- Circuit board with solder mask and silk screen.
- Complete component parts kit.
- Assembly instructions and circuit documentation.
- Program that displays the voltage on a PC screen.
- Complete PC source code for compiling in C++ Builder 4,5,6.
- Complete PC source code for compiling in Visual C++ 2005 .NET Express or full.
- Complete embedded source code for Hitech and CCS microcontroller C compilers.
- Pre-programmed and tested microcontroller (CCS compiled hex file).
- MPLab IDE, PiccLite C compiler and in-circuit programming software from Microchip.
( 19200 baud, 1 start bit, 8 data bits, 1 stop bit and no handshaking. )

Specifications:
- 54VDC max input voltage.
- 50UA max input current.
- 1.10Meg input impedance max.
- 1000 cycles per second max speed.
- +-1 count resolution.

This kit shows how to make a complete interface between a microcontroller and a PC! Part # DVM-001
DOES NOT include voltage input or in-circuit programming cables but it does include the headers for
connecting these or your own cables. Part number DVM-001-1 is fully assembled and tested.
Part Number DVM-001 $45.95 ? Qty (in stock)
(It is only necessary to select US or Non-US shipping once per order. Select "additional" for extra items.)

DVM-002 Kit contains the complete kit plus a 4-pin voltage input cable with alligator clips and
a in-circuit serial programming cable ( both cables are shown in the 4th picture above ). The serial
programming cable is shown connected to a PicKit1 board, which is not included in the DVM-002 but
can be purchased on our site below or from www.digikey.com. DVM-002-1 is fully assembled and tested.
Part Number DVM-002 $65.95 ? Qty (in stock)
(It is only necessary to select US or Non-US shipping once per order. Select "additional" for extra items.)

PicKit1 in-circuit programming and demo kit. Kit includes:

1 - PicKit1 fully assembled circuit board.
1 - USB cable for connection to PC.
1 - Software CD which includes drivers and in-circuit programming software.

USB to serial port adapter.

Use this adapter to connect the DVM-001 kit directly to your PC's USB port.

This inexpensive adapter lets you use a USB port as a standard serial port. Use it to add communications for any serial
peripheral or extra ports to newer PC's that don't have serial ports. The adapter is Plug & Play compatible and installs
easily in just minutes. Use our bus powered USB Hub to conveniently add up to 4 serial ports to 1 USB port!
Part Number SSP-016 $29.95 ? Qty (in stock)
(It is only necessary to select US or Non-US shipping once per order. Select "additional" for extra items.)

If you don't see the kit you would like listed here or you would like a quote for quantity pricing please send us an email at rs232pro@yahoo,com , we can send you an invoice.

<Home>